Doorkeeper VSF

Manufacturer:AXT-electronic GmbH & Co. KG, Wartburgstraße 10, 99817 Eisenach, Germany VSF electronic Doorkeeper – with with an analogue timer and solar power (4x NiMH rechargeable batteries). Reliable, secure operation, regardless of the weather or time of year – even when the sun takes a break. Let your vertical gate in the poultry house automatically Flexible and straightforward installation, very simple to set up. A overload protection prevents damage in the event of temporary blockages (e.g. a frozen sliding door). By using limit switches in the unit, there is no danger to animals located beneath the closing gate. It simply stops and then continues to close once the animal has moved away. The electronics are protected by a special coating. Up to 1.5 kg possible. Flexible installation possible using accessories. Further accessories, e.g. an external solar cell for indoor installation with a 2 m cable, will be available in future. HS, mHS, gHS and bioHS gates – gates + rails in four different sizes for the most common poultry breeds. Various mounting options are available through the use of pulleys. The 4 required batteries are included and simply need to be activated.  Safety instructions Not a toy; please keep children away from the device. Contains NiMH rechargeable batteries: please observe the disposal instructions. A mains power supply connection can be fitted as an option. Risk of injury inside the unit when the motor is running, due to moving mechanical parts   Batteries/rechargeable batteries may leak (in which case, remove them whilst wearing gloves) Mains adaptor designed for indoor use; do not use in outdoor sockets Risk of injury when opening the flap; do not place your hand between the opening flap. The system shuts off at approx. 1.5–2 kg; risk of injury Information on the battery and the timer Automatic chicken flap control with rechargeable batteries, which are charged via an integrated solar cell . (Operates, for example, for up to 4 months even during the darker months of the year) independent of mains sockets, e.g. for mobile chicken coops To Charging the batteries , the installation site must be exposed to daylight. Charging via a suitable charger for NiMH batteries is also possible Even without sufficient sunlight, the chicken flap is powered by the batteries for up to 4 months Reliable, safe operation, regardless of the weather or season – even when the sun takes a break.   Closing time is set using the analogue timer easily and relatively quickly 96 switching segments, each representing 15 minutes of switching time Multiple switching times per day can be set The setting applies all days of the week up to 1 kg, approx. 65 cm stroke Your benefits: Never be late for work again because you had to open the chicken coop first thing in the morning. Save yourself extra trips and a lot of time Save yourself arguments with your neighbours over your feathered friends Make the most of your Sunday breakfast with your family You can also benefit from: Top-class customer service from a German manufacturer based in the heart of Germany(relatively short distances, direct contact, straightforward solutions) Fast service provided by a dedicated team Optional or alternative items In future, an external solar cell . Provided the device is mounted inside the stable or in a location that is too shaded, the external solar panel will be required to charge the batteries. Note: Manual or twilight control is not possible. References Axt-electronic’s electronic Doorkeepers operate worldwide, from cold Canada to the hot Australian outback. The The poultry houses at the BDRG’s scientific poultry farm are fitted with our products. Installation Installation is very simple: first, fit the gate, pull it into the open position, then fit the VSF so that you can connect it to the gate via the loop (cord rolled up = as supplied!). Then activate the batteries – and you’re done. You can also control several sliders with a single VSF via UR pulleys (see installation examples), provided the maximum total weight is not exceeded. Variants and examples of how to install the VSF electronic Doorkeeper (and others) can be found here. Contents of the pack: Electronic Doorkeeper VSF including 4 AA NiMH rechargeable batteries.

Electronic Doorkeeper for control via an external socket-mounted timer (power on = open, power off = close) !  Important note: the required external socket timer is not included with the Doorkeeper. Please use one that suits your needs. Leave the work to your new electronic Doorkeeper. Automatic chicken coop flap control unit with a 12V power supply for operation from a mains socket via a socket-mounted timer The device allows you to control your chicken flap, for example, using your own simple socket timer or a Wi-Fi socket. For example, you could use a simple analogue timer switch from a DIY store. These are extremely easy to set up and are perfectly adequate for most applications. Do you have Wi-Fi in the henhouse and a power socket? Use a Wi-Fi socket timer to integrate your hen flap into your Wi-Fi network, or into your own preferred smart home system. Make use of the wide range of control options offered by your own Wi-Fi sockets to control the chicken flap remotely, e.g. whilst on holiday, in much the same way as you would control a lamp via Wi-Fi. For example, use the astro function on some socket timers to control it based on twilight. Simply switch the power on or off remotely to control the flap manually. Use the setting profiles in the timer app to set different switching times for different days.  Closing takes place relatively slowly, whilst opening is comparatively quick. This behaviour is advantageous, as the animals want to leave the barn early in the morning. The maximum weight of approx. 2 to 2.5 kg on the device should not be exceeded. Notes: Please note that the required socket and the power supply unit must be installed in a dry indoor location. When using the 12V power supply, the overload cut-out activates relatively late. There is a risk of injury if any part of the body becomes trapped between the chicken flap or the object being opened and the device. Do not reach into the loop or between the loop and the device whilst opening. This is not a toy! Use in the presence of children should only take place under supervision! Up to 2.5 kg slider weightQuick and easy to installIdeal if you want to use your own socket timer, or if you want to integrate the chicken flap into a Wi-Fi network Sliding panels and doors are optionally available in up to three different sizes Pull cord designed for long-lasting durabilityNever be late for work again because you had to open the chicken flap first thing in the morningSave yourself extra trips and a lot of timeSave yourself arguments with your neighbours over your feathered friendsMake the most of your Sunday breakfast with your familyContinue to benefit from: Top-class customer service from a German manufacturer based in the heart of Germany(relatively short communication channels, direct contact, straightforward solutions) Fast service from a dedicated team Further options – optional or alternative items: Note: There is no control option on the device itself. A socket timer and, accordingly, a socket near the Doorkeeper are required. To connect to a Wi-Fi network, a suitable Wi-Fi signal is required for a Wi-Fi socket timer. Alternatively, any socket timer (230V, 50Hz) can be used. The mains adaptor must only be used indoors in a dry environment! Alternative product: VSF, chicken coop flap controller with integrated manual timer (just as easy to set as a standard DIY shop socket timer), and power supply via solar cell/internal rechargeable batteries. References: Axt-electronic’s electronic Doorkeepers operate worldwide, from cold Canada to the hot Australian outback. The poultry houses at the BDRG’s Scientific Poultry Farm (www.bdrg.de) are equipped with our products. Installation: Installation is very simple: first fit the slider, pull it into the open position, then fit the VSF/r so that you can connect it to the slider via the loop (cord rolled up = as supplied!). Then activate the rechargeable batteries - done. You can also control several sliders with a single VSF/r via UR pulleys (see installation examples), provided the maximum total weight is not exceeded. Examples of how the VSF/r control unit can be fitted can be found here.

Manufacturer: SUNNY Computer Technology Europe s.r.o., Trnkova 156, 62800 Brno, Czech Republic   Safety instructions:         Not a toy; please keep children away from the device. The power supply unit is designed for indoor use. Do not use it in outdoor sockets. Do not open the housing!If the casing shows any visible damage, the power supply must no longer be used.           Mains power supply unit for Electronic Doorkeeper VS... Replacement of the old power supply unit or to supply VSBb, VSD or VSE (battery-operated) with additional power from the mains socket.* Input: 100 to 240 V ~  0.5 Max 50 to 60 Hz Output: +12 V DC 0.5 A Output power: 6 W max. *You can also connect the mains adaptor to the Doorkeeper door entry system (battery-powered). In this case, the batteries still in use will serve as an emergency power supply should the mains adaptor fail. The power supply is suitable for indoor use only! Not specified for damp locations! The appropriate contacts for connection to the pins of the electronic Doorkeeper are provided We reserve the right to change the suppliers and manufacturers of the power supplies. Specifications such as output power or cable length may vary in detail.

It couldn’t be simpler! Extremely simple installation, extremely simple operation and adjustment. Installation height 70 cm, width 25 cm   Pre-assembled VSF Electronic Doorkeeper. Simply attach it to the chicken coop with 4 screws. Setting the operating times is even easier. Done! Control is automatic via an integrated mechanical/analogue timer. Simply flip the tab = time set.  Battery operation with integrated solar cell - no more changing batteries. Complete freedom of installation. All you need is daylight and a height of approx. 70 cm for installation. Reliable, safe operation, regardless of the weather or season – even when the sun takes a break Indoor installation or in the shade? Connect the optional external solar panel "Solar 2". Problem solved. Integrated martens-proof rail. Greater safety for your animals. Prevents predators from getting under the flap and pushing it up. Save time during assembly. Save time during setup. Use the time you save to spend with your animals or enjoy your free time. Overall dimensions: Height 70 cm, Width: 24.3 cm, Depth: approx. 7 cm   Details: Integrated mechanical/analogue timer for quick and easy settings. Integrated solar cell and rechargeable batteries VSF-Compact slider weight approx. 300g Operates for up to 3 months without sunlight minimal installation effort The mounting surface should be level High-quality aluminium sliding gate / chicken flap manufactured in Germany High-quality, sturdy housing for the VSF control unit Dedicated German support with fast response times Made in Germany   Contents of the pack: Control unit / VSF Doorkeeper pre-mounted on aluminium frame (chicken flap) Mounting screws Rechargeable batteries

Solar 2b   External solar panel for Doorkeeper VSE-Solar, Doorkeeper VSD-Solar, BZ1 and BZ3 door entry systems 2-metre cable length. Disconnect the internal solar cell and simply connect the external one to the existing connection. The perfect addition to your solar-powered VSF Doorkeeper system. Do you want to install the VSF indoors? Or is the installation site too shady and dark? Simply connect the external solar cell and position it outside in direct sunlight.   Contents of the pack:external solar cell in plastic/mounting base*,2m cable *The colour of the mounting base may vary

Description: Medium-sized sliding gate for securing animal enclosures such as duck houses (accessory for electronic Doorkeepers VSB+ST, VSBb, VSD, VSE, VSF, VSF/r))Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. Therefore, if the rails are to be fitted flush with the opening, the opening must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly.   Technical specifications: Slider height: 400 mm Slider width: 300 mm Sash weight: 500 g Rail height: 695 mm Rail width: 20 mm   Contents: 2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)

Description: Large sliding gate for securing livestock pens, such as goose coops (accessory for the VSB+ST electronic Doorkeeper), VSBb, VSD, VSE, VSF, VSF/r)Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the sash from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. If the rails are to be fitted flush with the opening, the opening must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you can hold the rails in place so that you can cut the hole to size accordingly.   Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm   Contents:2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)