Automatic feeders

Note: The red rubber band shown in the pictures is no longer required for the current version of the feeder. It is therefore no longer included. The FA1-10 automatic feeder is suitable for the automatic feeding of up to 15 animals (e.g. poultry, birds, etc.) with dry feed (e.g. grain, pellets, etc.) through simple programming of feeding times and feed rations (e.g. 300 g three times a day). By using the FA-1 automatic feeder, you reduce the unwanted feeding of animals such as mice, sparrows and the like. Furthermore, once the respective feed ration has been consumed, your animals will also eat the less palatable feed. Installation: For indoor installation only During the day in summer, in dry weather, in a sheltered spot, e.g. an aviary Food: Dry food, grains, pellets, max. diameter 10 mm. No wet food, no flour! No foreign objects such as threads, twigs and the like! Pellets must be ‘rounded’, not angular! Function: During the feeding process, the respective feed ration trickles from the feed silo through a funnel into a container to be placed underneath (not included) The correct amount for your animals must be determined by carrying out 1–2 test runs and adjusting the motor runtime accordingly. Technical specifications FA1-10: Diameter of the food silo: approx. 180 mm Height: approx. 570 mm Feed silo capacity: approx. 10 litres Feeding time: possible every 15 minutes, adjustable via timer (running time from 1 second to 14 minutes 59 seconds possible, standard running time set to 5 seconds), preset standard feeding times at 8 am, 12 noon and 4 pm Flow rate: depends on the motor’s running time Batteries: 4 AA (Mignon cells, service life: approx. 1 to 5 years) Contents: FA1-10 electronic feeder Wall mounting kit Batteries

Manufacturer: AXT-electronic GmbH & Co. KG, Wartburgstraße 10, 99817 Eisenach, Germany Safety instructions:         not a toy, keep children away from the device contains batteries: observe the instructions for battery disposal   Risk of injury inside the device during motor operation due to moving mechanical parts   Batteries may leak (in this case, remove batteries wearing gloves)   Do not reach into the feed transport disc while the motor is running. Intervention, repairs or cleaning only when de-energised (remove batteries)  Note: the red rubber band shown in the pictures is no longer required for the current version of the automatic feeder. It is therefore no longer included. The FA2-10 automatic feeder is suitable for the fully automatic feeding of up to 15 animals (for example poultry and birds etc.) with dry feed by simply programming the feeding times and feed rations (for example 300 g 3 times daily). By using the FA-2 automatic feeder, you reduce the unwanted feeding of animals such as mice, sparrows and the like. In addition, after consuming the respective feed ration, your animals will also eat the less palatable feed material. The fully automatic feeder is installed indoors. It is not intended for outdoor use. Feed: Dry feed, grains, pellets with a diameter of max. 10mm Pellets must be “rounded”, not angular No wet feed, no flour No foreign objects such as threads, twigs and the like Function: During the feeding process, the respective feed ration trickles from the feed silo into the integrated feed trough. The amount suitable for your animals must be determined accordingly by means of one or two test runs and the motor running time must be set. Technical data FA2-10: Diameter: approx. 360 mm Height: approx. 630 mm Feed silo capacity: approx. 10 litres Feeding time: possible every 15 minutes, adjustable by means of timer (1s to 14:59 minutes running time possible, standard running time set to 20s), standard feeding times set to 8, 12 and 16 o'clock Feed rate: dependent on the running time of the motor and composition of the feed Batteries: 4 AA (Mignon cells, service life: approx. 1 to 5 years) Scope of delivery: Electronic automatic feeder FA2-10 Batteries

Replacement motor suitable for FA1 and FA2 automatic feeders with a 2-pin connection cable.

Rubber belt for feed dispenser feed wheel

FA-D digital timer with battery holder for automatic feeder   Contents: Timer, 4xAA battery holder, 2x batteries       (+2 AA batteries required to operate the FA motor. Not included) (Replacement for the previous digital timer. Can therefore be used in the existing housing. If an analogue timer is to be replaced, the version with the matching housing must be purchased. Available in the shop)

FA-D digital timer with battery holder for automatic feeders, complete with IP66 housing for direct mounting on the feeder. Ideal for older automatic feeders where the analogue timer can no longer be repaired. Analogue timers for automatic feeders are no longer available. Simply and easily replace the entire existing clock with a digital one by simply swapping the housing. The motor can be connected directly to the new clock. Contents: Timer, IP66 housing with cable gland, 4AA battery holder + 4 AA batteries