VSF/r

Electronic Doorkeeper for control via an external socket-mounted timer (power on = open, power off = close) !  Important note: the required external socket timer is not included with the Doorkeeper. Please use one that suits your needs. Leave the work to your new electronic Doorkeeper. Automatic chicken coop flap control unit with a 12V power supply for operation from a mains socket via a socket-mounted timer The device allows you to control your chicken flap, for example, using your own simple socket timer or a Wi-Fi socket. For example, you could use a simple analogue timer switch from a DIY store. These are extremely easy to set up and are perfectly adequate for most applications. Do you have Wi-Fi in the henhouse and a power socket? Use a Wi-Fi socket timer to integrate your hen flap into your Wi-Fi network, or into your own preferred smart home system. Make use of the wide range of control options offered by your own Wi-Fi sockets to control the chicken flap remotely, e.g. whilst on holiday, in much the same way as you would control a lamp via Wi-Fi. For example, use the astro function on some socket timers to control it based on twilight. Simply switch the power on or off remotely to control the flap manually. Use the setting profiles in the timer app to set different switching times for different days.  Closing takes place relatively slowly, whilst opening is comparatively quick. This behaviour is advantageous, as the animals want to leave the barn early in the morning. The maximum weight of approx. 2 to 2.5 kg on the device should not be exceeded. Notes: Please note that the required socket and the power supply unit must be installed in a dry indoor location. When using the 12V power supply, the overload cut-out activates relatively late. There is a risk of injury if any part of the body becomes trapped between the chicken flap or the object being opened and the device. Do not reach into the loop or between the loop and the device whilst opening. This is not a toy! Use in the presence of children should only take place under supervision! Up to 2.5 kg slider weightQuick and easy to installIdeal if you want to use your own socket timer, or if you want to integrate the chicken flap into a Wi-Fi network Sliding panels and doors are optionally available in up to three different sizes Pull cord designed for long-lasting durabilityNever be late for work again because you had to open the chicken flap first thing in the morningSave yourself extra trips and a lot of timeSave yourself arguments with your neighbours over your feathered friendsMake the most of your Sunday breakfast with your familyContinue to benefit from: Top-class customer service from a German manufacturer based in the heart of Germany(relatively short communication channels, direct contact, straightforward solutions) Fast service from a dedicated team Further options – optional or alternative items: Note: There is no control option on the device itself. A socket timer and, accordingly, a socket near the Doorkeeper are required. To connect to a Wi-Fi network, a suitable Wi-Fi signal is required for a Wi-Fi socket timer. Alternatively, any socket timer (230V, 50Hz) can be used. The mains adaptor must only be used indoors in a dry environment! Alternative product: VSF, chicken coop flap controller with integrated manual timer (just as easy to set as a standard DIY shop socket timer), and power supply via solar cell/internal rechargeable batteries. References: Axt-electronic’s electronic Doorkeepers operate worldwide, from cold Canada to the hot Australian outback. The poultry houses at the BDRG’s Scientific Poultry Farm (www.bdrg.de) are equipped with our products. Installation: Installation is very simple: first fit the slider, pull it into the open position, then fit the VSF/r so that you can connect it to the slider via the loop (cord rolled up = as supplied!). Then activate the rechargeable batteries - done. You can also control several sliders with a single VSF/r via UR pulleys (see installation examples), provided the maximum total weight is not exceeded. Examples of how the VSF/r control unit can be fitted can be found here.

Manufacturer: SUNNY Computer Technology Europe s.r.o., Trnkova 156, 62800 Brno, Czech Republic   Safety instructions:         Not a toy; please keep children away from the device. The power supply unit is designed for indoor use. Do not use it in outdoor sockets. Do not open the housing!If the casing shows any visible damage, the power supply must no longer be used.           Mains power supply unit for Electronic Doorkeeper VS... Replacement of the old power supply unit or to supply VSBb, VSD or VSE (battery-operated) with additional power from the mains socket.* Input: 100 to 240 V ~  0.5 Max 50 to 60 Hz Output: +12 V DC 0.5 A Output power: 6 W max. *You can also connect the mains adaptor to the Doorkeeper door entry system (battery-powered). In this case, the batteries still in use will serve as an emergency power supply should the mains adaptor fail. The power supply is suitable for indoor use only! Not specified for damp locations! The appropriate contacts for connection to the pins of the electronic Doorkeeper are provided We reserve the right to change the suppliers and manufacturers of the power supplies. Specifications such as output power or cable length may vary in detail.

Description: Medium-sized sliding gate for securing animal enclosures such as duck houses (accessory for electronic Doorkeepers VSB+ST, VSBb, VSD, VSE, VSF, VSF/r))Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. Therefore, if the rails are to be fitted flush with the opening, the opening must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly.   Technical specifications: Slider height: 400 mm Slider width: 300 mm Sash weight: 500 g Rail height: 695 mm Rail width: 20 mm   Contents: 2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)

Description: Large sliding gate for securing livestock pens, such as goose coops (accessory for the VSB+ST electronic Doorkeeper), VSBb, VSD, VSE, VSF, VSF/r)Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the sash from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. If the rails are to be fitted flush with the opening, the opening must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you can hold the rails in place so that you can cut the hole to size accordingly.   Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm   Contents:2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)