Sliders / Doors
Sliders / doors / flaps in 3 main sizes and more specialised sizes. There’s something to suit most applications. Made in Germany.
They are the perfect match for your new Doorkeeper. They are heavy enough to ensure the device works well thanks to their weight, yet light enough to keep power consumption very low when running on batteries or a rechargeable battery.
The rails are designed as H-profiles, allowing the sliding panel to run easily and securely within them. Holes for fixing are pre-drilled.
Marten-proof rails, which are fitted in front of the sliding panel to prevent predators from getting under the flap and pushing it upwards, are also available. These are already included in the HS, mHS and gHS-SET models. A simple and practical additional safeguard.
With pulleys, more ambitious rigging options can be implemented.
Find out more here: Installation options
Product range at a glance
Description: Large sliding gate for securing livestock pens, such as goose coops (accessory for the VSB+ST electronic Doorkeeper), VSBb, VSD, VSE, VSF, VSF/r)Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the sash from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. If the rails are to be fitted flush with the opening, the opening must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you can hold the rails in place so that you can cut the hole to size accordingly. Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm Contents:2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)
Description: Medium-sized sliding gate for securing animal enclosures such as duck houses (accessory for electronic Doorkeepers VSB+ST, VSBb, VSD, VSE, VSF, VSF/r))Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. Therefore, if the rails are to be fitted flush with the opening, the opening must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 400 mm Slider width: 300 mm Sash weight: 500 g Rail height: 695 mm Rail width: 20 mm Contents: 2 x rails1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)
Description: Sliding gate for securing livestock pens, such as chicken coops (accessory for electronic Doorkeepers VSB+ST, VSBb, VSD, VSE, VSF, VSF/r)Also includes a marten-proof rail and a connector to attach your sliding panel to the loop of your Doorkeeper’s pull cord Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The sliding panel runs approximately 1 cm within each rail. If the rails are to be fitted flush with the opening, the opening must not exceed 20 cm in width (22 – (2 × 1) = 20 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size. Technical specifications: Slider height: 330 mm Slider width: 220 mm Slider weight: 300 g Rail height: 595 mm Rail width: 20 mm Contents: 2 x rails 1 x sliding plate Fitting materials (4 x wood screws)1 x martin-proof rail1 x connector (screw + knurled nut)
Wide chicken coop sliding door (42x45 cm, WxH) with rails (69.5 cm long, 2 cm wide) for securing poultry housing, such as chicken coops or similar.Complies with the minimum requirements of the Animal Welfare Act (DE) for laying hens.There is currently none protective rail available for this item.
Description: Large sliding gate for securing livestock pens, such as goose houses (accessory for the VSB+ST or VSBb electronic Doorkeeper). Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. If the rails are to be fitted flush with the hole, the hole must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm Contents: 2x rails 1x Slider fitting kit
Description: Medium-sized, widened sliding gate for securing animal pens such as duck coops (accessory for VSB, VSC, VSD and Doorkeeper VSE).The slide plate is wider than on the standard mHS. This gives the animals a little more space when leaving the poultry house. The number of slides is limited. Assembly note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the sliding panel from jamming when opened. Installing the sliding panel may create a small gap. The best way to close this is to fit a piece of wooden slat on the floor in front of the sliding panel. This also provides good protection against martens or foxes. Installation note 2: The sliding panel runs approximately 1 cm within each rail. Therefore, if the rails are to be fitted flush with the opening, the opening must not exceed 40 cm in width. However, we recommend waiting until you can hold the sliding panel and rails in place so that you can cut the opening to size accordingly. A marten-proof rail is currently unavailable. Technical specifications: Slider height: 400 mm Slider width: 420 mm Slider weight: 650 g Rail height: 695 mm Rail width: 20 mm Contents: 2 x rails 1 x sliding panel 4 x Spax wood screws
Description: Medium-sized slider for securing livestock pens, such as duck houses (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. Therefore, if the rails are to be fitted flush with the hole, the hole must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 400 mm Slider width: 300 mm Slider weight: 500 g Rail height: 695 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Description: Slider for securing livestock pens, such as chicken coops (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: Each slider runs approximately 1 cm within the rails. If the rails are to be fitted flush with the hole, the hole must be no more than 20 cm wide (22 – (2 × 1) = 20 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 330 mm Slider width: 220 mm Slider weight: 300 g Rail height: 595 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Second-hand goods: Slider plates may have scratches, production marks or (filled) misdrilled holes, which do not affect functionality in any way. Description: Large sliding gate for securing livestock pens, such as goose houses (accessory for the VSB+ST or VSBb electronic Doorkeeper). Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. If the rails are to be fitted flush with the hole, the hole must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm Contents: 2x rails 1x Slider fitting kit
Second-grade goods: Slider plates may have scratches, production marks or (sealed) mis-drilled holes, which do not affect functionality in any way. Description: Medium-sized sliding gate for securing livestock pens, such as duck houses (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. Therefore, if the rails are to be fitted flush with the hole, the hole must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 400 mm Slider width: 300 mm Sash weight: 500 g Rail height: 695 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Second-grade goods: Slider plates may have scratches, production marks or (filled) misdrilled holes, which do not affect functionality in any way. Description: Slider for securing livestock pens, such as chicken coops (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: Each slider runs approximately 1 cm within the rails. If the rails are to be fitted flush with the hole, the hole must be no more than 20 cm wide (22 – (2 × 1) = 20 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 330 mm Slider width: 220 mm Slider weight: 300 g Rail height: 595 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Description: Our special UR2 deflection pulleys are used when more complex locking systems need to be implemented (guiding an extension cord). Installation: Variants and examples of how to install the VSB electronic Doorkeeper using deflection pulleys can be found under ‘Service and Documents’. Technical specifications: Height: 43 mm Width: 55 mm Length: 20 mm Dimensions of the integrated pulley: same as UR-VST Contents: 1 x pulley, fitting materials
Description: Our standard UR deflection pulleys are used when several sliders are to be operated using a single VSB, or when the VSB and sliders cannot be positioned optimally in relation to one another (requiring the use of an extension cord). Installation: Variants and examples of how to install the VSB electronic Doorkeeper using deflection pulleys can be found under ‘Service and Documents’. Technical specifications: Diameter: 40 mm Height: 8 mm Contents: 1 x pulley with fixing or bearing screw
Protective rail for our poultry house sliders in the three suitable sizes for: HS mHS gHS The protective rail prevents martens and foxes from getting under the sliding panel and pushing it open. This provides your animals with additional security. The rail can also serve as an installation aid. Installation: Position the rail, mark the slots, align the rails with the lower drill holes using the markings and screw them tight. You must then use a spirit level to ensure the rail is level and screw it tight. The distance between the rails is then correct. The slider has sufficient play so that it moves freely within the rails. Material: Aluminium