VSE-Solar – Automatic chicken flap with batteries and integrated timer, rechargeable batteries – solar-powered.
Note regarding credit cards:
Credit card payments are currently only possible via PayPal. You do not need a PayPal account to do this! Instructions:
Product information "VSE-Solar – Automatic chicken flap with batteries and integrated timer, rechargeable batteries – solar-powered."
The VSE all-in-one solution. Controlled by twilight, timer and manually; powered by a solar cell and NiMH rechargeable batteries.
- Doorkeeper VSE - Solar version > a solar cell is fitted + NiMH rechargeable batteries installed, instead of the standard alkaline batteries.
- Reliable, safe operation, regardless of the weather or time of year – even when the sun takes a break.
- The device operates even more independently of its installation location. Installation in sunlight or with good daylight illumination is required.
- Alternatively: Connection of external solar cell "Solar2b" possible.
Automatic summer time adjustment, different switching times at weekends or on Sundays only, twilight delay (closing at dusk after nightfall), operation without mechanical buttons, up to 3kg slider weight, efficient battery operation.
Opens and closes when it gets light or dark.
- Light sensor is built into the device. No extra light sensor required if the device is mounted on the outside of the coop.
- If the Doorkeeper is mounted inside the coop, please order a sensor extension, the external light sensor (ASb), in the appropriate length as well.
- The sensitivity of the sensor is easy to adjust so that it can be adapted somewhat to the installation location and the behaviour of the animals.
- Twilight delay (closing 1 to 90 minutes after the device has detected darkness, maximum 23:45)
Integrated timer with display and menu control
- Weekend function (Saturday and Sunday and/or Sunday different settings possible)
- Separate settings possible in the morning and evening (open until 12:00, close from 12:00 to 24:00)
- Operation from outside via magnet, your key to the device
Close AND open manually if required
- A magnet is held against a control panel on the device, which triggers the function (closing or opening).
- Control panel for magnet extendable (ext.SA) = manual control, even if the device is installed in the coop. If required, please order ext.SA in the appropriate length at the same time.
Battery operation
- 4x AA alkaline batteries (AA, LR6), inexpensive and available in any supermarket.
- Battery life approx. 2 years.
- Independent of mains sockets, for example for mobile chicken coops.
- Low battery indicator (LED)
Further information:
- External light sensor (1 to 6 metres) can be connected (optional) – for mounting the device in the coop
-
Extension of the manual control (1, 3 and 6 metres) possible (optional) – manual control also possible when mounted in the coop
-
Optimised mechanism – less strain on the cord
-
Flap stops if a chicken is underneath it. It continues closing when the animal has moved away again.
-
up to 3 kg slider weight
-
12V power supply available as an accessory (optional) – operate the device via 230V mains socket power, batteries can remain in the device as an emergency power supply
1x control magnet is always included in the scope of delivery.
If you need a Doorkeeper with which you want to open a pasture gate, then please take a look at the pasture gate openers BZ1, BZ3 (click on designation). These are the perfect combination for this application. In some cases, the VSE is not suitable for equine applications.
A great deal is possible with the VSE. There is a suitable setting for every chicken keeper. Benefit from our top customer service, Made in Germany quality and long warranty periods. The devices can be mounted flexibly and offer a top price / performance ratio.
You operate the menu via a control magnet on the front of the lid. The housing does not need to be opened and there are no mechanical components that could break. Quite an elegant solution. You can place the magnet on the device; it stays where it is.
Manual operation
- Close the flap by holding the magnet against the housing or the extension. The flap remains closed until the next morning and then opens again automatically - without you having to do anything.
- Or open the flap again the same day. It also closes automatically that evening.
LED display:
- The device outputs status information via an LED in the housing.
-
For example that the flap must be closed according to the limit switch position (for a limited time).
-
The batteries need to be changed.
-
A condition is present that requires your attention.
The LED displays are output for a limited time. This saves power and prevents disco lighting at night in the chicken coop.
Installation
Installation is very easy: first mount the slider, pull it into the open position, mount the VSE so that you can connect it to the slider via the loop (rolled-up cord = delivery condition!). Then insert the batteries and that's it. You can also control several sliders with one VSE via deflection pulleys "UR" (see installation examples).
Variants and examples for installation of the electronic Doorkeeper VSE can be found here.
| Contents: | 4x rechargeable batteries (NiMH), Operating solenoid, VSE-solar - Control system |
|---|---|
| Email: | service@axt-electronic.de |
| Manufacturer: | AXT-electronic GmbH & Co. KG, Wartburgstraße 10, 99817 Eisenach |
| Safety instructions: | * Contains NiMH rechargeable batteries; these may leak (in which case, remove the batteries whilst wearing gloves); follow the disposal instructions, * If powered by batteries rather than rechargeable batteries, you must disconnect the solar cell and connect NO mains adaptor DO NOT, * Optional power supply unit designed for indoor use; do not use in sockets outdoor, * Risk of injury when opening the flap; do not place your hand between the flap as it opens. The overload protection cuts out at approx. 3.5–4 kg; risk of injury, * This magnet is not a toy; it may cause bruising, injury if the magnet breaks, choking if swallowed; not a toy |
Log in
You may also be interested in:
Solar 2b External solar panel for Doorkeeper VSE-Solar, Doorkeeper VSD-Solar, BZ1 and BZ3 door entry systems 2-metre cable length. Disconnect the internal solar cell and simply connect the external one to the existing connection. The perfect addition to your solar-powered VSF Doorkeeper system. Do you want to install the VSF indoors? Or is the installation site too shady and dark? Simply connect the external solar cell and position it outside in direct sunlight. Contents of the pack:external solar cell in plastic/mounting base*,2m cable *The colour of the mounting base may vary
Description: Slider for securing livestock pens, such as chicken coops (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: Each slider runs approximately 1 cm within the rails. If the rails are to be fitted flush with the hole, the hole must be no more than 20 cm wide (22 – (2 × 1) = 20 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 330 mm Slider width: 220 mm Slider weight: 300 g Rail height: 595 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Description: Medium-sized slider for securing livestock pens, such as duck houses (accessory for VSB+ST or VSBb electronic Doorkeepers) Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. Therefore, if the rails are to be fitted flush with the hole, the hole must be no more than 28 cm wide (30 – (2 × 1) = 28 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 400 mm Slider width: 300 mm Slider weight: 500 g Rail height: 695 mm Rail width: 20 mm Contents: 2 x rails 1 x Slider fitting kit
Description: Large sliding gate for securing livestock pens, such as goose houses (accessory for the VSB+ST or VSBb electronic Doorkeeper). Installation note 1: The rails have an H-shaped profile. The lower drill holes are on the inside. The upper drill holes are on the outside. This prevents the slider from jamming. Installation note 2: The slider runs approximately 1 cm into each rail. If the rails are to be fitted flush with the hole, the hole must be no more than 31 cm wide (33 – (2 × 1) = 31 cm). However, we recommend waiting until you have positioned the rails so that you can cut the hole to size accordingly. Technical specifications: Slider height: 500 mm Slider width: 330 mm Slider weight: 800 g Rail height: 795 mm Rail width: 20 mm Contents: 2x rails 1x Slider fitting kit
Mounting kit for control magnets includes:2 x handle magnets2 x screws1 x 5-hole perforated plateThe control magnet can be conveniently positioned in a wooden wall or brickwork next to the Doorkeeper with SA function . The magnet can be attached there after each use to ensure it is not lost.
Reusable egg box for 10 eggs - sturdy and secure With an insert/basket in which the eggs can be boiled, carried and placed on the table. Colour: transparent green, AXT-electronic logo in white Environmentally friendly thanks to being reusable Easy to clean, e.g. in the dishwasher Safe transport for your breakfast egg from your favourite farmer to your home. You or your favourite egg supplier don’t need to keep hoarding cardboard egg cartons; instead, simply bring your MeiBox back time and again, fill it with fresh eggs and carry them home safely. A practical and convenient insert/basket for storing, boiling and serving eggs 1x basket for 4 eggs; 1x basket for 6 eggs Also ideal as a gift for a chicken keeper Made in Germany.
Electronic egg timer for cooking, featuring the AXT logo and three different melodies Ideal for all softies, average Joes and tough guys. How does it work? Place the Piep-Ei in cold water with the eggs, bring to the boil and remove to the sound of the appropriate melody. This way, you can tell whether the egg is soft-boiled, medium or hard-boiled – the perfect breakfast egg for every taste. The alternative egg timer and the perfect addition to your chicken coop, where the Sunday breakfast egg is sure to be a hit. Perhaps also as a gift for a fellow chicken keeper or a fellow breeder from the club. Clever HEI-Tech